NAMRUB 20 is a technically specified natural rubber with excellent processing characteristics and good physical properties. It’s high green strength, tack and cohesive properties makes it an ideal choice in the manufacture of high performance passenger and truck tyres.The low viscosity and easier mixing characteristics of NAMRUB 20 reduces the mixing period considerably making it very cost effective.

It is presented in a wooden pallet. Each pallet consists of thirty six rubber bales weighing either 331/3 kg or 35 kg. Every bale is wrapped in high quality polyethylene which is dispersible and compatible with natural rubber at 110° celcius.

Latex Coagulum
Cup Lump
Tree Lace
Unsmoked Sheets

Dirt % wt. max. (mean + 35 D)	0.16	Compound Mooney Viscosity
Ash % wt. Max	1.00	Vc (ML 1 + 4 at 100° Celcius )	52.5
Nitrogen % wt.max	0.6	Mooney Scorch time (min to 5 unit rise
Volatile Matter % wt.max	0.8	above min at 120° Celcius)	21.2
Acetone Extract % wt max	5.0	Monsanto rheometer at 140° Celcius
Copper Content max	8 PPM	Optimum cure t90 (mins. )	26.8
Manganese Content max	10 PPM	Cure rate, t90 - t2 (mins.)	18.7
Po (Wallace Plasticity) Min	30	Scorch time t2 (mins.)	8.1
PRI % min	40
Mooney Viscosity	70-90

Low rolling resistance	High performance passenger tyres
Low heat generation	Heavy load bearing bias truck tyres
Excellent traction for all season treads	Motorcycle and bicycle tyres
High resitance to cutting,	Inner tubes, conveyer belts, hoses
chipping and tearing	General rubber products

Cure conditions : 28 min . at 140° C

HARDNESS, IRHD	65	AKRON ABRASION, mm3/500rev	21
MODULUS AT 30%, MPa	12	GOODRICH HBU, deg C, 30min from 100 deg C	7

TENSILE STRENGTH, Mpa

DUNLOP resilience, % 23 dec C

COMPRESSION SET, 25%, 24b/70 C%